RARE BREED FRT-15 E3 Enhanced Reset Trigger
$330.00
Let’s talk about the Rare Breed FRT-15 E3. This isn’t your average trigger job. It’s a mechanically distinct, forced-reset trigger system designed for the AR-15 platform. We’re not here to hype it; we’re here to explain what it is, how it works, and why it’s built the way it is. You need to understand the mechanics and, crucially, you are responsible for knowing your local, state, and federal laws regarding its use and installation.
How It Works: The Forced Reset Explained
Forget what you know about standard semi-auto triggers. A standard trigger fires, you release it, a spring pushes it forward (the reset), you pull it again. The FRT-15 changes that sequence.
Here’s the mechanical operation: When you fire, the recoil of the bolt carrier group coming back into battery physically forces the trigger to reset. This means the reset is not dependent on your finger’s release speed. As long as you maintain forward pressure on the trigger after the shot, the firearm’s own cycle will reset it for you, allowing for a very rapid follow-up shot. It’s a purely mechanical function inherent to the design. This is the core of the FRT-15.
Build & Features: No Compromise on Materials
This isn’t a stamped sheet metal part. The housing is machined from 7075-T6 aluminum – the same stuff used for premium upper and lower receivers. The internal components are precision-cut via wire EDM (Electrical Discharge Machining) for absolute dimensional accuracy and then treated with a black nitride QPQ finish. This isn’t just for looks; it’s for extreme surface hardness, wear resistance, and corrosion protection. It comes with a 3-position safety selector and anti-walk pins are included, because a trigger this precise needs to stay exactly where you put it.
- Mechanically Forced Reset: Utilizes firearm recoil for instantaneous trigger reset.
- Premium Construction: 7075-T6 aluminum housing, wire EDM cut internals, black nitride QPQ finish.
- 3-Position Selector: Safe, Semi, Hard Reset (FRT) modes.
- Includes Anti-Walk Pins: For secure, reliable installation.
- AR-15 Platform Compatibility: Designed for mil-spec AR-15 lower receivers.
Installation & Function: Get It Right
Installation is straightforward for anyone familiar with AR-15 lower assembly. If you’re not comfortable, take it to a competent gunsmith. The instructions are clear, but attention to detail is key. Once installed, you must perform a full function check. This means checking operation in all selector positions, ensuring proper reset, and verifying safety function. A dry-fire practice session (with a cleared, safe firearm) is recommended to understand the unique feel of the forced reset. Maintenance is simple – keep it clean and lightly lubricated like any other precision fire control component.
Who This Is For & The Responsibility
The Rare Breed FRT-15 E3 is for the experienced shooter who understands firearm mechanics and is seeking a unique, mechanically-driven trigger system. It’s for those who appreciate precision machining and robust engineering. It offers a distinct shooting dynamic based on its forced-reset principle.
The critical part: Firearm law is complex and varies wildly. The status of forced-reset triggers has been subject to legal review and interpretation. It is your sole responsibility to determine if this product is legal to own, install, and use in your jurisdiction. We cannot and do not provide legal advice. When in doubt, consult with an attorney specializing in firearm law.
Straight Answers to Common Questions
What exactly does “forced reset” mean?
The firearm’s cycling action physically pushes the trigger forward to reset it, independent of your finger’s release. This mechanical action allows for a faster possible rate of fire compared to waiting for a traditional spring reset.
Is this a binary or bump-fire trigger?
No. It is mechanically different. Binary triggers fire on both pull and release. Bump-firing is a technique using forward pressure. The FRT-15 is a forced-reset trigger. Its function is defined by the mechanical interaction between the trigger shoe and the bolt carrier group.
Will this work in my Polymer80 lower?
It is designed for mil-spec AR-15 lowers. Compatibility with any specific aftermarket lower, including Polymer80 frames, depends on that lower’s internal dimensions and tolerances. Some fitting by a gunsmith may be required for non-standard receivers.
What’s included in the box?
You get the complete FRT-15 E3 trigger assembly, a 3-position safety selector, and a set of anti-walk pins. All necessary hardware is included.
What about reliability?
The use of high-end materials and precise manufacturing aims for maximum durability. Like any mechanical device, performance can be influenced by ammunition, firearm maintenance, and overall build quality. It is not a military-specification trigger group.
Bottom Line: The Rare Breed FRT-15 E3 is a uniquely engineered, robust
Reviews
There are no reviews yet.