Pf940cv1™, Polymer80 Pf940v2™, and Pf9SS™ 80% Frame and Jig Kit Bundle (Black Only)

Overview

This bundle delivers three of the most technically refined 80% frames from Polymer80 in a single black-only kit: the PF940Cv1™, the PF940v2™, and the PF9SS™. Each frame is precision-machined from high-strength polymer, requiring standard finishing steps to complete the receiver. The bundle includes the corresponding jig kits for each frame, ensuring proper alignment and drilling geometry during the build process. Designed for builders who value consistency across multiple platforms, this kit provides a unified foundation for compact, full-size, and subcompact configurations without requiring separate purchases of tooling or fixtures.

Features & Specs

Each frame in the pf940cv1™, polymer80 pf940v2™, and pf9ss™ 80% frame and jig kit bundle (black only) is manufactured to Polymer80’s published tolerances using proprietary reinforced nylon polymer. The PF940Cv1™ is optimized for compact slide assemblies and uses a standard 3.9-inch barrel length. The PF940v2™ accommodates full-size slides and 4.5-inch or longer barrels. The PF9SS™ is designed for single-stack subcompact slides with a 3.4-inch barrel profile. All three frames feature integrated trigger housings, stainless steel locking blocks, and textured grip panels with undercut trigger guards.

• PF940Cv1™: compact frame with 3.9-inch barrel compatibility; includes jig with drill bit and end mill
• PF940v2™: full-size frame with 4.5-inch to 5.0-inch barrel compatibility; includes jig with drill bit and end mill
• PF9SS™: subcompact single-stack frame with 3.4-inch barrel compatibility; includes jig with drill bit and end mill

All jigs are pre-aligned for the respective frame geometry and include hardened steel drill bushings. The black finish is uniform across all three frames with no color variation. Weight per frame (unfinished): PF940Cv1™ 2.1 oz, PF940v2™ 2.4 oz, PF9SS™ 1.6 oz.

Who It’s For

This bundle is intended for experienced builders who require multiple frame platforms from a single purchase. The pf940cv1™, polymer80 pf940v2™, and pf9ss™ 80% frame and jig kit bundle (black only) is suited for those completing custom builds across compact, full-size, and subcompact configurations. The kit eliminates the need to source jigs separately, reducing setup time. Builders should have prior experience with 80% frame finishing, including drilling, milling, and trigger assembly. The PF9SS™ frame requires finer hand tool control due to its smaller internal pocket dimensions. No firearm experience is required beyond standard 80% receiver completion protocols.

• Builders creating a three-platform set (compact, full-size, subcompact) from one order
• Those who prefer black-only frames without color-matching concerns across different frame models
• Individuals with access to a drill press, vise, and hand files for frame finishing

Shipping & FFL

This product is classified as an 80% frame and jig kit and does not require a Federal Firearms License (FFL) for shipment within the United States. However, the purchaser must confirm that local, state, and municipal laws do not prohibit the possession, finishing, or transfer of 80% frames. Some states impose restrictions on unfinished frames, including serialization requirements or outright bans. It is the responsibility of the buyer to verify compliance with all applicable laws before placing an order. The pf940cv1™, polymer80 pf940v2™, and pf9ss™ 80% frame and jig kit bundle (black only) will ship to the provided residential or commercial address. Signature may be required at the carrier’s discretion. No frame will be transferred to any party that cannot lawfully possess it under federal or state regulations.

• No FFL required for shipment to most US states
• Buyer must verify local legality before purchase
• Signature may be required; cannot ship to PO boxes in some jurisdictions